Contact us

Mitsuwa Etching Strainers

Ideal for Food&Beverage, Pharmaceutical, Cosmetic, Fine chemical, High-Purity chemical, and High functional material industries

  • All stainless stee(l SUS316L)material
  • Etched strainer with fire precision hole
  • Rerention ratings : 20~200mesh (Nominal)

Products

Pipe-Insertable Strainers

[$alt]

Pipe-Insertable Strainers (KL)

[$alt]

Cartridge Strainers

[$alt]

Special Designed Series

[$alt]

Features

Retention ratings with uniform multi-pore structure

Precise holes are uniformly opened up using photo etching, which is used in the manufacture of semiconductors and other electronic components.
*PET=Precision Etching Technology

Superior regenerative washing

Extremely economical thanks to its simple media structure, which makes it superior in regenerative washing for multiple reuse. Superior sanitation as there are no burrs or protuberances.

Drastically reduced risk of contamination

Unlike with wire mesh, there is no contamination by debris from broken wires, and hardly any reside from clogging.

All Mitsuwa etching strainers are shipped after cleaning, drying and clean packing in a clean room (Class 10,000 or 1,000).

Pipe-Insertable Strainers

For catching contaminants in piping

Easily inserted into existing piping

Easily inserted into 1 to 4 inch ferrules and KAMLOK hose coupler.

*4S size is irregular.

Made of all SUS 316L excellent in heat resistance and corrosion resistance

It can be used from -190°C to 400°C. (Applicable to CIP, SIP)


Specification

Material All stainless steel (SUS316L) material
Nominal retention ratings 10, 20, 40, 60, 80, 100, 150, 200 mesh
*10 mesh needs confirmation

The screw connection is defferent in field installation condition.
Insertion possible KAMLOK of KL series. The material in stainless steel only and also hose shank or screw connection.
Δ P differs for each product. Please contact us for details.

Nonstandard sizes can also be manufactured.
Example) Connection diameter sizes of less than 1 inch, changes in total length, screw or flange connections, etc.

Cartridge Strainers

Aim for zero emissions

Compatible sizing

It can be inserted directly into a container (housings) of a general cartridge filter.


Excellent pressure resistance

Material with filter media thickness of 1.0 mm was used. Withstand pressure 0.7 MPa. It can also handle high viscosity fluids.


Made of all SUS 316L excellent in heat resistance and corrosion resistance

It can be used from -190°C to 400°C. (Applicable to CIP, SIP)


Zero emission

It is not a disposable cartridge filter. It is not a wire mesh filter that is hard to wash. It is superior in regeneration cleaning and it can be repeatedly used, so it can contribute to waste reduction.


Specification

Material Strainers: SUS316L
Plate: SCS14
Nominal retention ratings 20, 40, 60, 80, 100, 150, 200 mesh
Pressure resistance 0.7MPa
Surface area 10 inch:0.04
20 inch:0.09
30 inch:0.13

Special Designed Series

Customized products

With precise etching technology, you can customize the special design strainer.

Frequently received requests

  • Is Plate Style/Disk Style products possible? / YES.
  • Can the thickness of the etching strainers material be changed? / YES.
  • Is asymmetric pore structure possible? YES.
  • Can you design a pore PCD? / YES.
  • Is mesh size not shown on the catalog possible? / YES.

Please contact sales department for special design product requirements.
Please understand that special designed products are mainly supplied in lot.

Washing and Regenerating Method

Use the following method for washing and regenerating if there is clogging and strainer presure loss increases.